Final Configuration Of A Network Routing System

Perform the following steps:
⦁ According to the Lab Layout Reference Diagram, determine and apply the initial switch configuration on the NYACCESS1 and NYCORE1 switches.
⦁ According to the Lab Layout Reference Diagram, determine and apply the initial router configuration on the NYEDGE1 and NYEDGE2 routers.
⦁ According to the Lab Layout Reference Diagram, determine and apply the VLANs and Trunk configurations to meet the following requirements:
⦁ On NYACCESS:
⦁ Create VLAN16  – Named Engineering
⦁ Create VLAN17- Named Marketing
⦁ Create VLAN18 – Named Sales
⦁ Configure Fa0/1 as a member of VLAN16
⦁ Create SVI VLAN17withIP Address 192.168.17.10/24
⦁ On NYCORE1:
⦁ Create VLAN16  – Named Engineering
⦁ Create VLAN17- Named Marketing
⦁ Create VLAN18 – Named Sales
⦁ Create trunk links between NYACCESS1 and NYCORE1 for VLANs 16 – 18
⦁ Create a trunk link between NYCORE1 and NYEDGE1 for VLANs 16 – 18
⦁ According to the Lab Layout Reference Diagram, determine and apply the configuration necessary to implement inter-VLAN routing with router on a stick on NYEDGE1 for VLANs 16 – 18.
⦁ Configure a default route on NYEDGE1 to 192.168.254.2.
⦁ Configure a static route on NYEDGE2 for 192.168.16.0/24 to NYEDGE1
⦁ Verify all configurations.